Studio Bagno Comoda 800 Disabled Toilet - Blue seat

Comoda 800 is our new disabled suite featuring hygenic, easy to clean Rimless design, complete with Studio Bagno's signature Cleanmax anti-bacterial self-cleaning glaze. Comoda 800 has a longer projection as well as increased seat height, making it suitable for all sanitary projects requiring accessibility, including wheelchair access. This suite is available with either a Grey or Blue toilet seat. Comoda is suitable for all sanitary projects requiring accessibility. AS1428.1 Accessible Compliant

Connector, backrest and fixings included.

Warranty

Studio Bagno warranty for toilet suites (pan and cistern, vitreous only): 1 / 10 years — 1 year labour and 10 years replacement product.

Warranty commences on the date of purchase from a Studio Bagno distributor, or on handover for new buildings.

Installers must make a thorough inspection of the product before installation to ensure it is free of defects and breakage. If a fault is found, contact us with proof of purchase to arrange a replacement product.

Should a product with an obvious defect be installed it may still be replaced under warranty, but labour will be the responsibility of the customer or installer.

A seat which comes loose with continued use is not covered by warranty. All seats under normal usage have a tendency to loosen; it is the responsibility of the owner to tighten seats periodically.

Warranty will not apply where:

• Purchase of the product cannot be verified.
• The item has not been installed by a licensed installer — for anything connected to water lines this must be a licensed plumber.
• The installer has made custom alterations to the product, such as alteration of cisterns or modification of valves.
• Ceramic or metal parts are damaged by abrasive cleaners, or by cleaning agents containing chlorine or acids.
• Damage is caused by non-compliance with Studio Bagno cleaning instructions.
• A valve runs on because the water lines were not flushed before installation. It is the responsibility of the installing plumber to clean the water lines prior to installation and to ensure the seals and valves function correctly.
• Basins have been fixed to tops or walls with epoxy resin.

Manufacturing variance

Due to the nature of ceramic manufacturing, Studio Bagno products are subject to normal production variances. Dimensions may vary by up to 2% from those stated on the corresponding technical page, and Studio Bagno reserve the right to adjust product dimensions when necessary. All installation work should be carried out with the physical product on site.

Colour products

Colours may vary from the images shown, and photographs of every colour variation are not always available. Coloured products are subject to normal manufacturing variances, so slight differences may occur between production runs or compared with existing samples. Studio Bagno cannot accept liability for colour variation once a product has been installed; inspect the physical product before installation.

Cleaning & Care

• To preserve the finish on your toilet seat, use a warm water solution with a little biodegradable detergent. Buff with a clean dry cloth or paper towel.
• White vinegar can also be used, especially on any metal components: it will not degrade the finish and is antibacterial.
• Under no circumstances use chemicals, abrasives, bleach or products containing bleach. These will damage the product over time and will void your warranty.

In-stock items dispatch from Sydney within 2 business days. Enter your postcode in the Delivery card above for an estimate; bulky freight is quoted at checkout.

Unused items in original packaging can be returned within 30 days. We are an authorised stockist of every brand we sell, so warranty claims are handled directly with our brand partners.