Matang Light Grey 300X600 Matte

When it comes to stone-look ceramic tiles our Matang range is a popular choice. Perfectly suited to both the home as well as light commercial spaces, this tile features pressed edges which make it easy and cost-effective to lay on internal wall and floor surfaces.

With multiple sizes, colours, finishes and faces to choose from our Matang ceramic tile offers real variety. Both the matte and gloss finish provide a durable option and cater to any taste.

Glossy tiles can brighten up a space and are easy to clean while catering to the modern customer. A matte finish tile helps to achieve a traditional look and has the desirable characteristic of being less prone to the visual effects of scratching. Both options will provide you with long-lasting and high-quality finishes in your project.

Matching gloss wall tiles are also available.

10 Year Warranty

Quality Assurance

Stoneworld guarantees for 10 years that all first quality tiles we supply will be repaired or replaced when the product is proven and acknowledged to be faulty.

This assurance begins from the date of purchase and does not cover chips or defects that are the result of misuse or abuse and excessive wear and tear. Tiles must be installed in accordance with AS3958.1. Tiles will be considered defective only when they do not meet the accepted Australian or industry standard.

PLEASE CHECK TILES ON RECEIPT AND BEFORE LAYING

Stoneworld will only warrant and limit to replace with a comparable product, any product which fails to meet current Australian Standards requirements. It is Stoneworld’s policy not to accept any claims for reimbursement, replacement or repair after the tiles have been laid, if that claim relates to tile defects such as: size, shade and finish variation, or any fault which should have been checked prior to these tiles being installed. It is industry expectation that the tiler, builder or home owner is responsible for checking these tiles before laying them. Any concern or noticeable fault should be reported straight away and no installation work to be commenced. Please Note: The Australian Standards state that a minimum of 95% of these tiles shall be free from visible defects that would impair the appearance of a major area of the tiles (5% of the tiles may possibly have defects and this is allowable). It is the responsibility of both the retailer & the end user on receipt of delivery & prior to installation to: Check that the correct tiles and Quantity have been delivered. Check that the batch is of consistent size, tonality/shade Make sure enough tiles of the same batch are available to complete the required area If not, order more of the same batch (Tonality/Shade and Size) prior to commencing layin Inspect tiles for possible defects Choose tiles from several boxes and mix them during the installation to ensure blending Once tiles have been laid ensure they are protected from damage by other tradespersons to handover to the owner

No claims will be accepted after tiles have been fixed.

Daily Care

• Sweep or vacuum to remove loose dirt and sand
• Mop with warm water and a pH-neutral, sulphate-free cleaning agent
• Rinse thoroughly — residue causes streaks and dulls the finish

Occasional Deep Clean

• Use a high-alkaline detergent (pH >9) for greasy deposits
• For textured/profiled tiles, let the cleaner dwell before scrubbing
• Steam or pressure cleaning can be used occasionally
• Always finish with a clean water rinse

Prevention Tips

• Use entry mats at all doorways — including pet entry points
• Don't over-apply cleaning product; more isn't better
• Avoid household soaps — they leave slippery scum
• Use a no-rinse detergent if rinsing is difficult

Dos and Don'ts

Safe to use

• pH-neutral, sulphate-free cleaners for everyday use
• Proprietary abrasive agents on unglazedtiles only
• Soft brushes and appropriate cleaning pads
• Organic solvent detergents for greasy deposits (occasional)

Avoid these

• Acidic cleaners — attack grout and haze glazed tiles
• Abrasive pads on glazed surfaces — cause surface wear
• Overuse of high-alkaline detergents
• Scrubbing machines with coarse abrasive pads

In-stock items dispatch from Sydney within 2 business days. Enter your postcode in the Delivery card above for an estimate; bulky freight is quoted at checkout.

Unused items in original packaging can be returned within 30 days. We are an authorised stockist of every brand we sell, so warranty claims are handled directly with our brand partners.