Designed by Alisa & Lysandra, leading Australian Interior Designers.

Wall Hung, All-Door or Door & Drawer model.

Thermolaminated* v-groove cabinetry with Arch feature design.

Comes standard with 40mm thick benchtop included. Choose from all benchtop options: Durasein, Cherry Pie & Caesarstone. Upgrade to 60 or 90mm Statement or 60mm Royale benchtop available, surcharge applies.

Complimentary 180mm Splashback with 80mm radius, in matching benchtop material.

Soft close doors with premium graphite interior.

Door & Drawer model features ADP Deluxe drawers in graphite and 1 x Como Small Drawer Organiser in grey to complement the interior.

Warranty

Conditions: 1. Items must be installed by a licensed tradesperson. 2. Failure is due to a fault in the manufacture of the product. 3. Proof of purchase is provided. 4. The installation of the product is in accordance with the instructions provided.

Care & Maintenance

Cabinets

• To maintain the finish on your cabinet use only a soft cloth and weak solution of non abrasive detergent.
• To remove scratches, marks, etc. on two pack polyurethane, rub gently with car cutting compound, car polish or household brass/silver cleaner.
• Goods used in construction are water/moisture-resistant, but not water-proof.
• All cabinets should be installed at least 300mm away from showers or bathtubs to avoid water damage.

Solid Surface, Cherry Pie

• Wipe clean with a soft damp cloth or sponge.
• For basic stains clean with mild detergents. For gloss and semi-gloss surfaces you can use a non abrasive polish or Brasso. For matte surface use a scourer pad or scotch bright to maintain the matte finish.
• Cherry Pie, Durasein and Caesarstone benchtops have excellent heat and chemical resistant properties compared to other surfacing products, however to preserve the surface and protect against damage from heat, do not place hot items directly on the surface. Even though Cherry Pie, Durasein and Caesarstone can withstand high temperatures, prolonged periods or extreme heat can cause permanent damage.

Ceramic Basins & Tops

• To maintain the finish on your ceramic top use only a soft cloth and weak solution of non abrasive detergent.
• Due to the glazed surface of ceramic tops, scratches cannot be repaired or removed.
• Due to ceramic being a handcrafted product that is fired at high temperatures, some visual distortion may occur. This is not a defect but can be seen to add to the beauty of the product. 26 27 Signs of poor ventilation The earliest sign to look out for is black spotting on mirrors. When the steam or humidity rises to the top of the room and ventilation is not sufficient, the mirror (which is normally positioned high up in the room) is the first thing to steam up. Over time, this causes damage to the mirror that appears as black spots or corrosion which cannot be reversed. Other signs might include paint starting to flake on the ceiling, bubbling of paint coatings on fixtures, and furniture swelling. Evidence of mould or mildew is also a good indicator that your ventilation is not adequate. How to achieve good ventilation The best sign that your ventilation is sufficient is that the mirror doesn’t steam up and the tiled walls aren’t wet. The best way to achieve this is to have a good exhaust fan that is correctly sized for the space, to do this you need approximately 50 cfm per toilet and 50cfm per shower or bath. The fan should be installed to exhaust air into a duct that directs the air outdoors, not into your walls. Using the wall joists to guide exhaust air can result in moisture and mould problems in the walls. Run the fan every time water is being used in the bathroom and run it for around 15 minutes after you shower. If you have a bathroom window, opening that daily (even in the chilly winter months) in addition to using the exhaust fan will help to keep your bathroom fresh and mould-free. We hope you enjoy your well ventilated, mould-free bathroom for many years to come! Good bathroom ventilation will save you thousands of dollars and keep your family healthy - mould can be a huge problem in bathrooms if they’re not properly ventilated. We’ve broken down everything you need to know about ventilation with a handy guide. Why ventilation is so important It’s crucial to have the best ventilation possible for your bathroom as moisture can be the root of all wet area products breaking down and failing, in particular your vanity and mirror. These products are usually water resistant not waterproof so it’s important moisture does not build up which will mean your products will last longer, saving you money! Good ventilation is also key to achieve lower humidity in the room which will minimize bacteria growth and prevent mould and mildew. You’ll have less mildew on your grout, walls and ceilings, and fewer mould spores to threaten your respiratory health. So why wouldn’t you keep your bathroom well ventilated! Let’s talk bathroom ventilation Scan to watch a quick 3 minute video with our top bathroom care and maintenance tips to ensure you get years longer out of your bathroom products!

Cast Marble & Acrylic

• To maintain the finish on your Cast Marble or Acrylic top use only a soft cloth and weak solution of non-abrasive detergent.
• To remove scratches, marks, etc. rub gently with car cutting compound, car polish or household brass/silver cleaner.

Tips

• ADP products are produced from materials that are well suited to the bathroom, however it is important that your bathroom has sufficient ventilation to avoid excessive moisture. High humidity will lead to permanent dampness and mould, resulting in deterioration of the materials.
• Care must always be taken to dry any excessive moisture or water spillage.

Made-to-order pieces ship by dedicated bulky-freight carrier, door to door — you will get a call to book the delivery window. Lead times are shown per product.

Made-to-order items are covered by warranty but cannot be returned for change of mind — order a finish sample first if unsure.